above ground pool hoses


The adapter is simply screwed on tightly and offers a secure, tight hold. The connection hoses do not become tight (drip), what can I do? Now add our free items to every order! The multi-function swimming pool hose from Steinbach is available with a diameter of 32 mm in one or more sections from 1.10 m length and a fixed length of 6.6 m. The two ends of the hose are sleeved for optimum fastening.

The shut-off valve is used to completely interrupt the water flow. This affects many areas of your pool: Connecting hoses are used in pool technology for sand and cartridge filter systems, pool heating and pool accessories such as vacuum cleaners, pool brushes and other cleaning equipment.

The complete set is suitable for all INTEX pools with a hose connection of 32 mm.

If there is a leak at the connection, you can use a Teflon tape to seal the screw connections again. inground hoses kink Note: For INTEX pools with 32 mm connections you need an adapter. It is used to connect a hose with 32 or 38 mm diameter without 2" internal thread with a 2" connection and is suitable for many INTEX products. The swimming pool hose from INTEX with 32 mm diameter and a fixed length of 150 cm is universally applicable and suitable for all chlorine- and salt-based above-ground-pools. At Steinbach you will find a wide range of lengths of all commercially available ribbed swimming pool hoses with a diameter of 32 mm or 38 mm for installation and attachment parts. If necessary, use hose clamps to tighten the connections. The 3-way valve is used for targeted water flow when using a pool heater, heat pumps and solar collectors or solar mats. Swimming pool hose 38 mm fixed length 7.6m. Weak dripping is best eliminated by wrapping Teflon tape over the affected connections. The respective ends of the hose are either sleeved or with internal thread. The hose can be used for both chlorine and salt water pools.

32 or 38 mm hoses are used for various purposes in your swimming pool for piping: you can connect your filter system, skimmer, vacuum cleaner as well as corner and edge brushes, pool heaters and much more to your pool with a suitable hose.

This is not intended.

The multifunctional swimming pool hose with a diameter of 38 mm can be supplied in one or more sections of 1.50 m or with fixed lengths of 6 m, 7.6 m or 9 m. You can easily connect the 1.10 m or 1.50 m long hoses for pool piping to meet your individual requirements. The double hose nozzle is used to connect two hoses with a diameter of 32 mm each. Tip: Hose clamps for hoses with a diameter of 38 mm ensure a secure, firm connection.

The hose nozzle can be used with a 38 mm diameter swimming pool hose and has an adhesive connection with an outer diameter of 50 mm (OD 50). Make sure that the hose connection and the diameter of the hose are the same. Yes, but note that the hose must be cut straight, deburred and cleaned. Sleeved, reinforced ends serve for secure fastening.

The T-shaped grommet made of high-quality plastic is used to connect swimming pool hoses with a diameter of 32 mm or 38 mm. The adapter thus enables a secure hold. The T-shaped nozzle can be used for pools with chlorine and salt water. The cause of damage and thus leaks can be manifold: For example, the connection to the hose may have become permeable or bathers may unintentionally introduce small, pointed objects into the pool, causing cracks or similar in the hose. JavaScript seems to be disabled in your browser. If you notice that water is leaking, first make sure you have the correct hose size for your connections of any kind. The special adapter can be used for both chlorine and salt water pools. 0409331).

The hose clamps are used for a tight connection and can be used for swimming pool hoses with 32 mm as well as 38 mm diameter. Swimming pool hoses with a diameter of 32 mm or 38 mm can be connected to the 3-way valve. The hose nozzle is used for the connection during pool piping and can be used with a 32 mm or 38 mm diameter swimming pool hose and has a 1 1/2 inch external thread. From a minimum purchase value of EUR 40, - you can now order the following items for free. In addition, more glue has to be applied. Can I glue a PVC adhesive hose into PCV piping parts?

Auxiliary materials for connecting hoses such as hose nozzles, hose clamps, adapters for INTEX pools, T-piece nozzles, gate valves as well as 3-way valves and much more can be found in our product range. It is made of high-quality plastic and has a 38 mm hose connection and a 1 1/2" external thread. The double hose nozzle is used to connect two 38 mm x 38 mm hoses. Hose connections for all commercially available ribbed swimming pool hoses usually have a diameter of 38 mm. The special adapter made of high quality plastic is used for pressure side connection of Steinbach filter systems and INTEX Pools with 2 inch thread connection with 1 inch internal thread. This means: a 32 mm hose connection requires a 32 mm hose, a 38 mm hose connection requires a 38 mm hose. There are sufficient possibilities to create transitions, the parts required for this are listed in our brochure ("Individual components Styrofoam pools"). The store will not work correctly in the case when cookies are disabled. Why is it that the 3-way valve from the bypass set is very stiff when used for the first time. The hose is flexible and suitable for both chlorine and saltwater pools. The INTEX special adapter is made of high quality plastic and is suitable for tight connection of the filter unit type ECO with INTEX swimming pool hoses with a diameter of 38 mm and 2 inch thread as well as INTEX pools with a diameter of 32 mm with hose connection and gate valve with 2 inch thread. It is ready for use with chlorine and salt water pools.

For the best experience on our site, be sure to turn on Javascript in your browser. Included in delivery are 2 pieces of feed-throughs, 2 pieces of sealing caps, 1 inlet nozzle and 1 screen grid.

Included in delivery is a double pack of hose nozzles for 32 mm hoses. It is easier with the appropriate adapter screw connection.

The gate valve can be used for chlorine and salt water pools.

The hose nozzle can be used for swimming pools with chlorine and salt water.

A screw connection on both sides with 2'' internal thread is used. 32 mm connections as well as hoses can be found mainly in your products from INTEX. 062085) - Please note that you also need flat gaskets for sealing (art.no. Tip: Hose clamps for 32 mm diameter hoses ensure a firm connection. The hose nozzle can be used for swimming pools with chlorine and salt water. Included in delivery is a Teflon tape for a secure, tight connection and a double pack of hose nozzles. The swimming pool hoses offered by Steinbach as well as all accessories can be used for swimming pools with chlorine as well as with salt for water disinfection.

Included in delivery is a double pack of hose nozzles for 38 mm swimming pool hoses. Hose clamps are available from Steinbach as a double pack or as a pack of 4 pieces. It is best to use our 2" double nipples (art.no. The two ends of the hose are sleeved for optimum fastening. For the best experience on our site, be sure to turn on Javascript in your browser. With special adapters you can also use a 32 mm hose from INTEX with a 38 mm diameter connection. Included in the delivery is a double pack of hose nozzle 38mm/adhesive, OD 50. Select you country and continue shopping. After the first couple of turns, the lever will turn smoothly. If the hose is torn, it is advisable to replace it with a new one to avoid water damage and energy loss.

The INTEX swimming pool hose with 38 mm diameter at a fixed length of 150 cm is suitable for all INTEX pools.

The hose is flexible and is suitable for both chlorine and salt water pools. How do I connect two INTEX floating hoses with 2" external thread? This is due to the fact that the seals are lubricated inside with a lubricant - on the one hand for sealing and on the other hand so that the components can be adjusted more easily (plastic on plastic). This can sometimes happen due to production reasons; please refer to our notes in the operating instructions. The special adapter is used to connect Steinbach filter systems and INTEX Pools with 2 inch thread connection to 1 1/2 inch external thread. The special adapter is 9.2 cm long and made of high-quality plastic.

Can I glue a PVC pipe into a transition fitting?